Rubber Conveyor Belt — Factory Direct Manufacturer & Custom Supplier

This listing represents our factory-direct rubber conveyor belt manufacturing capability — covering EP and NN fabric carcass belts in any width, ply count, length, and cover compound required for industrial, mining, port, and bulk material handling applications. Unlike a distributor or trader, we manufacture the belt at our own facility and supply direct to the buyer or project contractor — reducing the supply chain layers between the factory and the end user.

This listing is for buyers who know their specification and want a direct factory quotation without going through intermediaries. If you are unsure of the exact specification, share your conveyor data and material type and our technical team will recommend the appropriate configuration before quoting.

Standard product range — what we manufacture

Category	Carcass options	Cover options	Width range
Standard EP fabric belt	EP100–EP500, 3–6 ply	Abrasion-resistant (DIN Y/X/W or equivalent)	300–2400 mm
Standard NN fabric belt	NN100–NN400, 3–6 ply	Abrasion-resistant, impact-grade	300–2200 mm
Heat-resistant belt	EP or NN fabric	T1 (≤120°C), T2 (≤150°C), T3 (≤200°C)	400–2000 mm
Fire & antistatic (FRAS) belt	EP or NN fabric	FR, FRAS (per ISO 284 / ISO 340 / other)	400–1800 mm
Oil-resistant belt	EP or NN fabric	MOR, SOR (NBR compound)	300–1800 mm
Cleated / patterned belt	EP or NN fabric	T-rib, C-rib, chevron, block cleat	300–2000 mm
Corrugated sidewall belt	EP or NN fabric	Standard abrasion, custom compound	300–2000 mm (base belt)

All belt categories are made to order based on the buyer's specification. Standard configurations in common widths can be quoted from stock or short-run production; non-standard widths or specialty compounds may have longer lead times — confirm the required delivery date in your inquiry.

Why buyers order direct from the factory

No distributor margin

Ordering from the manufacturing facility rather than a trader or distributor eliminates the intermediary margin — typically 15–30% of the ex-factory price depending on the market — while maintaining direct contact with the technical team who produced the belt. This is especially valuable for buyers with repeat orders or project-specific quantities who can negotiate directly on volume pricing.

Specification flexibility

A distributor carries stock in standard widths and grades; a factory can produce any width, ply count, and compound combination that the buyer specifies. For project orders with non-standard belt widths or specialty covers, factory-direct sourcing is often the only practical route to the exact specification required.

Direct technical communication

When ordering factory direct, technical questions about compound selection, test standards, or splice preparation are answered by the engineering team — not by a sales agent re-reading a data sheet. This reduces the risk of specification errors and speeds up the confirmation of complex or multi-item orders.

Information needed for a complete quotation

• Carcass type and grade: EP or NN, and the specific grade (e.g. EP200, EP315, NN200) — or provide the required belt strength (N/mm) and we will recommend the grade.
• Ply count: number of fabric plies required (typically 3–6).
• Belt width: in mm (or inches for ARPM-referenced specifications).
• Belt length: in meters (or feet), total length required (not center-to-center conveyor distance — specify which measurement you are providing).
• Top cover thickness: in mm.
• Bottom cover thickness: in mm.
• Cover compound: abrasion-resistant (standard), heat-resistant (T1/T2/T3), fire-resistant (FRAS), oil-resistant (MOR/SOR), or other specialty.
• Quantity: in meters (or number of rolls), and the roll length if relevant.
• Delivery destination and timeline.

Customization discussion

Any dimension, grade, or compound within our manufacturing capability can be quoted. Edge treatment, surface finish, splice preparation (finger lap ends for field vulcanization, or factory-spliced endless), marking / branding, and packaging can all be specified. Confirm your full requirements in the inquiry and we will advise on options and lead times.

Frequently asked questions

What is the minimum order quantity for factory-direct supply?

Minimum order quantities depend on the belt width and type. Common widths in standard grades may be available from short-run stock; non-standard widths or specialty compounds typically require a minimum production run. Specify your required quantity and timeline and we will advise on minimum order and lead time.

Can I get third-party test reports or SGS inspection?

Third-party inspection (SGS, TÜV, BV, or equivalent) can be arranged at the buyer's cost. Factory test reports covering tensile strength, elongation, cover adhesion, and abrasion loss are typically included with the shipment for production orders. Confirm your documentation requirements in the inquiry.

What is the typical lead time for a production order?

Lead time depends on belt type, width, quantity, and current production schedule. Standard EP or NN belts in common widths typically take 2–4 weeks from order confirmation; specialty compounds or very wide belts may take longer. Confirm your required delivery date in the inquiry and we will advise on availability.

How do I submit an inquiry?

Use the Inquiry Now link to open our contact page at https://sinoconve.com/contact-us and include your full belt specification, quantity, and delivery requirements.