SINOCONVE CX High Load Transmission Cogged V-Belt for Industrial Drives
The SINOCONVE CX transmission cogged V-belt is positioned for industrial pulley drives that require a CX-marked belt configuration. The supplied material lists CR rubber, polyester cord reinforcement and polyester-cotton outer canvas. Its cogged construction is presented for demanding transmission layouts where belt marking, pulley groove and finished length must be matched before replacement.
For an accurate CX quotation, record the full marking on the existing belt, measure the finished length, check the pulley groove and provide center distance, shaft alignment, running speed, transmitted load and available tension adjustment.
Request a CX drive review
Click Inquiry Now and provide the belt marking, measured length, pulley groove, center distance, motor speed, load, quantity and working conditions.
CX product overview
| Product | CX high load transmission cogged V-belt |
| Marking | CX, to be confirmed against the complete belt marking |
| Drive type | Cogged V-belt friction transmission with compatible pulley grooves |
| Rubber material | CR rubber, as listed in the supplied material |
| Reinforcement | Polyester cord |
| Outer fabric | Polyester-cotton canvas |
Performance information to confirm
The supplied content refers to greater power transmission than classical V-belts, suitability for high loads, static conductivity to ISO 1813, oil/heat/ozone/abrasion resistance and a temperature range from -50°C to 120°C. Confirm the selected CX compound, test documentation and actual service range before treating these statements as fixed guarantees.
Cogged construction for industrial transmission
Notched CX configuration
The product is presented as a CX transmission cogged V-belt. Confirm the complete marking and compatible pulley groove rather than selecting by width alone.
Cord-supported drive
Polyester cord is listed as the reinforcement. Motor power, speed, load and start-stop pattern should be reviewed before final selection.
Material reference
The supplied material identifies CR rubber, polyester cord and polyester-cotton outside fabric. Confirm the final compound for the working environment.
Drive-condition matching
Oil, heat, ozone, abrasion, dust and tension conditions should be reviewed together with pulley diameter and machine duty.
Equipment applications
The supplied material references pumps, fans, blenders, milling plants, drilling machines, automotive applications, HVAC systems and compressors. These are application references, not a substitute for a machine-specific drive calculation or compatibility review.
CX replacement checklist
- Record the complete marking on the removed belt and verify the CX designation.
- Measure the finished belt length and check the pulley groove dimensions.
- Note sheave diameter, center distance, shaft layout, alignment and tension travel.
- Provide motor power, running speed, transmitted load and start-stop frequency.
- Describe exposure to oil, heat, ozone, abrasion, dust, chemicals and moisture.
- Confirm quantity, packaging and any required inspection or technical documents.
Specification reference and CX confirmation
The supplied table includes multiple wrapped and cogged sections. It shows C/22X at 22 mm top width, 13 mm height and 40°, while the cogged sections shown include 3VX, 5VX and 8VX. Because the table does not provide a dedicated row labelled only “CX”, confirm the CX-specific finished dimensions, angle, length code and pulley profile before publication or quotation.
Discuss the correct CX configuration
For a quotation, send the CX marking together with the existing belt length, pulley details, center distance and operating load. The belt team can then review whether the requested section and finished dimensions match the current drive arrangement.
Request a CX belt review
Click Inquiry Now to send your machine type, CX marking, measured length, pulley dimensions, speed, load and quantity.
Suggested inquiry: “Please review a CX transmission cogged V-belt for [machine], marking [ ], measured length [ ], pulley details [ ], center distance [ ], speed [ ], load [ ] and quantity [ ].”
Production process
Cooperative partner reference
Company information
Frequently asked questions
What does CX refer to in this product listing?
CX is the belt designation used in the product title and listing. Confirm the complete marking, finished length and pulley groove before ordering because the supplied table does not include a standalone CX dimensional row.
Which machines are referenced for this belt?
The supplied material references pumps, fans, blenders, milling plants, drilling machines, automotive applications, HVAC systems and compressors. Actual suitability depends on the drive geometry and duty cycle.
What materials are listed for the CX construction?
The supplied material lists CR rubber, polyester cord and polyester-cotton outer canvas. Confirm the final compound and supporting documentation for the intended service conditions.
How can I request a quotation?
Use the Inquiry Now link and include the CX marking, finished length, pulley data, operating conditions and quantity.
