SINOCONVE A Type Transmission Wrapped Rubber V-Belt for Industrial Drives
The SINOCONVE A Type transmission wrapped rubber V-belt is positioned for industrial pulley drives requiring an A-section belt. Its wrapped outer fabric, NR/SBR rubber layers and polyester cord reinforcement are presented for classical V-belt transmission applications. The supplied table identifies A at 13 mm top width, 11 mm pitch width, 8 mm height, 330–8000 mm length range and 40° angle.
For an accurate A Type quotation, record the complete marking on the existing belt, measure the finished length, check the pulley groove and provide center distance, shaft alignment, running speed, transmitted load and available tension adjustment.
Request an A Type drive review
Click Inquiry Now and provide the belt marking, measured length, pulley groove, center distance, motor speed, load, quantity and working conditions.
A Type product overview
| Product | A Type transmission wrapped rubber V-belt |
| Section | A, to be confirmed against the complete belt marking |
| Top width | 13 mm |
| Pitch width | 11 mm |
| Height | 8 mm |
| Length range | 330–8000 mm, as shown in the supplied table |
| Angle | 40° |
| Drive type | Classical wrapped V-belt friction transmission with compatible pulley grooves |
Wrapped multi-layer construction
Rubber layer structure
The supplied structure identifies NR/SBR top rubber, buffer rubber and bottom rubber, with polyester cord reinforcement and polyester-cotton outer fabric.
Wrapped outer fabric
The wrapped outer fabric is part of the listed A Type construction. Confirm the final compound, cover specification and service environment before ordering.
Applications from the supplied material
Blending systems, choppers, HVAC systems, lawnmowers, compressors, crushers and scarifiers are referenced. Actual suitability depends on the drive geometry and operating duty.
Performance information to confirm
The supplied content refers to multiple special designs, equal power transmission, high loads, low elongation, long service life, operational safety, static conductivity to ISO 1813, and oil/heat/ozone/abrasion resistance at -55°C to 70°C. Confirm the applicable construction and documentation before publishing these as guaranteed claims.
Confirmed A Type specification
| Type | Top width | Pitch width | Height | Length range | Angle |
| A | 13 mm | 11 mm | 8 mm | 330–8000 mm | 40° |
The dimensions and length range are copied from the supplied A-section table. Confirm the complete belt marking and finished length before publication or quotation.
Related section references
The supplied material also includes Z/FM/O, B, C, D and E classical sections; 3V, 5V, 8V, SPZ, SPA, SPB and SPC narrow sections; and other special types. These are references only and should not be used as A Type-specific dimensions.
A Type replacement checklist
- Record the complete marking on the removed belt and verify the A section.
- Confirm the 13 mm top width, 11 mm pitch width, 8 mm height and 40° angle.
- Measure the finished belt length and check the pulley groove dimensions.
- Note sheave diameter, center distance, shaft layout, alignment and tension travel.
- Provide motor power, running speed, transmitted load and start-stop frequency.
- Describe exposure to oil, heat, ozone, abrasion, dust, chemicals and moisture.
Request an A Type belt review
Click Inquiry Now to send your machine type, A-section marking, measured length, pulley dimensions, speed, load and quantity.
Suggested inquiry: “Please review an A Type transmission wrapped rubber V-belt for [machine], marking [ ], measured length [ ], pulley details [ ], center distance [ ], speed [ ], load [ ] and quantity [ ].”
Production process
Cooperative partner reference
Company information
Frequently asked questions
What are the confirmed A Type dimensions?
The supplied table identifies A with a 13 mm top width, 11 mm pitch width, 8 mm height, 330–8000 mm length range and 40° angle. Confirm the complete marking, pulley groove and finished length before ordering.
What materials are listed for this wrapped V-belt?
The supplied material lists NR/SBR top, buffer and bottom rubber, polyester cord reinforcement and polyester-cotton outer fabric.
Which machines are referenced?
Blending systems, choppers, HVAC systems, lawnmowers, compressors, crushers and scarifiers are referenced. Actual suitability depends on the complete drive arrangement.
How can I request a quotation?
Use the Inquiry Now link and include the A-section marking, finished length, pulley data, operating conditions and quantity.
