SINOCONVE 2GT 10mm Open-End Rubber Timing Belt for Printing Machine Linear Drives
This 2GT 10mm open-end rubber timing belt is designed for positioning and linear-drive applications in printing machines and automated equipment. Its 2GT tooth profile supports accurate pulley engagement and consistent motion, while the reinforced rubber construction is intended to provide flexibility and dimensional stability for linear travel systems.
The suitable timing-belt configuration depends on the 2GT profile, belt width, open length, pulley arrangement, center distance, transmitted load, travel distance, speed and working environment. Share your machine and drive information with our team so we can review the application and confirm the correct belt specification.
Get a faster, more accurate quote
Click Inquiry Now and include the machine type, travel distance, open belt length, belt width, pulley details, load, speed, quantity and operating conditions.
Listed product configuration
| Product | 2GT 10mm open-end rubber timing belt |
| Pitch profile | 2GT |
| Nominal width | 10 mm, based on the product designation |
| Construction | Open-end rubber synchronous timing belt |
| Typical applications | Printing machines, linear drives and automated positioning equipment |
Material and application note
Pitch profile, belt width, open length, pulley compatibility, tension, load, travel distance and operating environment should be confirmed before ordering. Final positioning accuracy and service behavior depend on the selected belt, pulley and machine configuration.
Timing belt construction and performance
Accurate tooth engagement
The 2GT toothed profile is intended to engage with a matching pulley and support synchronized motion for printing-machine and linear-drive applications.
Open-end installation
An open-end belt can be supplied for linear travel systems where the finished length and belt installation method are confirmed during the machine review.
Reinforced rubber construction
The supplied timing-belt information describes a synthetic rubber belt body, fiberglass cord reinforcement and wear-resistant nylon elastic fabric protecting the teeth. Confirm the selected construction for the machine application.
Why buyers choose a 2GT open-end timing belt
Supports repeatable linear positioning
The toothed belt and matching pulley are intended to provide synchronized movement for linear travel and positioning systems.
Matches printing-machine drive layouts
The 2GT 10mm open-end format can be reviewed for printing machines and automated equipment where travel distance, belt installation and pulley layout must be matched.
Supports application-based sizing
Open length, belt width, pulley arrangement, load and speed can be discussed together to confirm the belt dimensions for the machine.
Application details we check
- Machine type, printing process or linear-drive function.
- Required travel distance, open belt length, center distance and installation method.
- 2GT pulley tooth form, pulley diameter, belt width and tooth engagement.
- Moving load, acceleration, speed, start-stop frequency and positioning requirements.
- Ambient conditions involving dust, ink, oil, chemicals, temperature changes or continuous duty.
- Joining method, packaging, replacement-belt dimensions and required documentation.
Providing these details helps our team reduce back-and-forth and prepare a more accurate 2GT open-end timing-belt recommendation and quotation.
Customization discussion
Depending on the application, ask our sales team about open length, belt width, 2GT tooth profile, fiberglass cord construction, tooth fabric, joining method, packaging and finished dimensions. Availability and suitability should be confirmed against the machine layout and required quantity.
Get a technical recommendation and quote
Click Inquiry Now and send your machine type, travel distance, open length, 2GT pulley data, belt width, moving load and speed.
Suggested inquiry: “Please quote a 2GT 10mm open-end rubber timing belt for [printing machine / linear drive], travel distance [ ], open length [ ] mm, pulley details [ ], moving load [ ], speed [ ], quantity [ ].”
Frequently asked questions
What is the 2GT 10mm open-end timing belt used for?
It is positioned for printing machines, linear drives and automated positioning equipment that use a matching 2GT toothed pulley system.
What information is needed to specify the open-end belt?
Provide the travel distance, open belt length, belt width, pulley details, moving load, speed, center distance and installation method.
Can the open length and belt construction be discussed?
Yes. Open length, belt width, reinforcement, tooth fabric and installation method can be discussed and confirmed against the machine design.
How do I submit an inquiry?
Use the Inquiry Now link and include the machine type, travel distance, open length, pulley data, belt width and quantity.
Rubber Timing Belt Profiles
Company information
