SINOCONVE L T-Type Rubber Timing Belt
This L page focuses on packaging and printing positioning. The belt uses a T-Type tooth profile and a CR-rubber/fiberglass-cord construction, with the exact geometry and compatible pulley system confirmed before production.
The supplied construction uses high-quality synthetic CR rubber, fiberglass cord and highly wear-resistant nylon elastic fabric on the tooth surface. This combination is described for accurate synchronous transmission without normal operating slip, repeated dynamic bending and resistance to cracking, ozone, aging, heat and wear.
Get the correct L specification faster
Use Inquiry Now and send the complete belt marking, T-Type profile, belt width, teeth number or pitch length, pulley data, speed, power or torque, quantity and operating conditions.
Confirmed L technical data
| Tooth Profile Family | T-Type |
| Type | L |
| Pitch | 9.525 mm |
| Tooth Angle | 40° |
| Bottom Tooth Thickness | 4.65 mm |
| Tooth Height | 1.91 mm |
| Belt Thickness | 3.60 mm |
| Teeth Number Range | 23-530 |
| Pitch Length Range | — |
| Belt Body | Synthetic CR Rubber |
| Reinforcement | Fiberglass Cord |
| Tooth Fabric | Wear-Resistant Nylon Elastic Fabric |
Profile compatibility note
L is not selected by pitch alone. Confirm the T-Type tooth geometry, pulley tooth form, belt width, tooth count or pitch length, pulley tooth counts, center distance and installation tension before production.
Why buyers consider this L timing belt
Application-focused selection
The source application range includes precision machinery, packaging equipment, printing systems, indexing drives, office equipment and general synchronous transmission.
Matching pulley requirement
The T-Type belt must be used with a pulley that has matching pitch and tooth geometry.
B2B order flexibility
MOQ, packaging, sample, urgent delivery and order-specific documentation can be discussed with the sales team.
Timing-belt construction and engagement
Positive synchronous engagement
The molded tooth profile is intended to engage a matching timing pulley. Correct tooth profile, pulley geometry and installation tension are required for stable synchronous motion.
Profile-specific selection
For the L type, confirm pitch, belt width, teeth number or pitch length, pulley tooth profile, pulley tooth counts, speed and load before production.
Rubber body and reinforcement
The listed construction uses Synthetic CR Rubber, reinforced with Fiberglass Cord. The tooth contact surface is protected by Wear-Resistant Nylon Elastic Fabric. Final construction should be confirmed against the required operating conditions.
T-Type profile reference
The table below keeps the supplied technical reference within the same profile family. A dash means the source workbook did not confirm that value.
| Type | Pitch | Tooth Height | Belt Thickness | Teeth Range |
|---|---|---|---|---|
| MXL | 2.032 mm | 0.51 mm | 1.14 mm | 43-2044 |
| XXL | 3.175 mm | 0.76 mm | 1.52 mm | 46-124 |
| XL | 5.080 mm | 1.27 mm | 2.30 mm | 22-510 |
| L | 9.525 mm | 1.91 mm | 3.60 mm | 23-530 |
| H | 12.700 mm | 2.29 mm | 4.30 mm | 29-440 |
| XH | 22.225 mm | 6.35 mm | 11.20 mm | 53-220 |
| XXH | 31.750 mm | 9.53 mm | 15.70 mm | 56-144 |
| T2.5 | 2.5 mm | 0.70 mm | 1.30 mm | 42-312 |
| T5 | 5 mm | 1.20 mm | 2.20 mm | 30-400 |
| T10 | 10 mm | 2.50 mm | 4.50 mm | 34-536 |
| T20 | 20 mm | 5.00 mm | 8.00 mm | 61-181 |
Operating properties from the supplied specification
- Excellent dynamic curve performance
- Crack resistance
- Ozone resistance
- Anti-aging performance
- Heat resistance
- Wear resistance
Selection information to confirm
- Complete belt marking and L / T-Type profile identification.
- Pitch length or teeth number, belt width and required quantity.
- Matching pulley tooth profile, pulley tooth counts and center distance.
- Speed, power or torque, installation tension and duty cycle.
- Operating temperature, dust, oil, moisture and other environmental conditions.
- Sample, drawing, custom marking, packaging or inspection-document requirements.
A timing belt must use a pulley with matching pitch and tooth geometry. Final dimensions and commercial terms are subject to order confirmation.
Typical application scope
The supplied T-Type product description covers precision machinery, packaging equipment, printing systems, indexing drives, office equipment and general synchronous transmission. This L page emphasizes packaging machinery, printing systems and indexing equipment while final suitability remains subject to pulley matching and application confirmation.
Request a technical recommendation and quotation
Click Inquiry Now and provide the belt marking or L profile, required width, teeth number or pitch length, pulley geometry, speed, torque or power, quantity and environment.
Suggested inquiry: “Please quote L T-Type rubber timing belts, width [ ], teeth number / pitch length [ ], quantity [ ], pulley profile [ ], speed [ ], power or torque [ ], and operating conditions [ ].”
Frequently asked questions
What data has already been confirmed on this page?
Profile family T-Type, type L, pitch 9.525 mm, tooth height 1.91 mm, belt thickness 3.60 mm and source construction are confirmed.
What data remains order-specific?
Belt width, final tooth count or length, pulley pairing, speed, torque or power, tension and environmental requirements remain order-specific.
What is the minimum order quantity?
The supplied trade data lists 30 Pieces.
How is the product packed?
The source workbook lists Plastic Sleeve and Export Carton.
Can custom marking be requested?
The source attributes list custom width and length as Available and OEM/ODM as Available; marking requirements should be confirmed with the order.
Rubber Timing Belt Profile Reference
Company information
