SINOCONVE 5000-S3M-100 Rubber Synchronous Timing Belt for Industrial Power Transmission
The 5000-S3M-100 rubber synchronous timing belt is designed for accurate and efficient power transmission in industrial machinery. Its S3M tooth profile is intended to provide positive engagement with matching pulleys for stable, low-slip operation.
The suitable timing-belt configuration depends on the pitch profile, belt width, pulley arrangement, center distance, transmitted load, speed, working environment and required belt length. Share your drive information with our team so we can review the application and confirm the correct specification.
Get a faster, more accurate quote
Click Inquiry Now and include the belt type, pitch profile, width, tooth count or length, pulley details, speed, load, quantity and operating conditions.
Listed product configuration
| Product | 5000-S3M-100 rubber synchronous timing belt |
| Pitch profile | S3M |
| Nominal width | 100 mm, based on the product designation |
| Drive type | Synchronous toothed power transmission |
| Available constructions | Open-end, integral sleeve and double-sided timing-belt options, subject to application confirmation |
Material and application note
Tooth profile, belt width, tooth count, pulley compatibility, tension, load and operating environment should be confirmed before ordering. Dimensional stability and wear behavior depend on the selected belt construction and actual working conditions.
Timing belt properties
Stable synchronous engagement
The toothed profile is designed to engage with a matching pulley and support synchronized power transmission with reduced slip compared with a friction-drive belt.
Application-focused selection
Belt width, pitch profile, tooth count, pulley size, load and speed should be reviewed together before the belt is selected.
Reinforced belt construction
The supplied product information describes a high-quality synthetic CR rubber belt body, fiberglass cord reinforcement and a wear-resistant nylon elastic fabric protecting the belt teeth. Confirm the selected construction for the application.
Available timing-belt constructions
Double-sided timing belt
Double-sided timing belts are described in two tooth arrangements: DA with symmetrical teeth and DB with staggered teeth. Confirm the required arrangement from the drive layout.
Integral timing belt sleeve
The supplied information lists a 450 mm sleeve height, a minimum order of one sleeve and an available sleeve cutting machine. Confirm the required cutting and finished belt dimensions before production.
Open-end rubber timing belt
The supplied range includes L, H, MXL, XL, XH, XXH, T5, T10, T20, HTD-3M, HTD-5M, HTD-8M, HTD-14M, HTD-20M, STPD/STS-3M/5M/8M/14M/20M and RPP/HPPD-3M/5M/8M/14M profiles. Confirm profile compatibility with the pulley.
Why buyers choose a rubber synchronous timing belt
Supports accurate power transmission
The toothed belt and matching pulley are intended to transfer motion synchronously with controlled engagement and low slip.
Offers multiple belt formats
Double-sided, integral sleeve and open-end configurations can be reviewed according to the drive layout, installation method and required finished dimensions.
Supports industrial drive customization
Pitch profile, width, tooth count, reinforcement, tooth fabric, cover construction and finished length can be discussed according to the equipment requirements.
Application details we check
- Equipment type, drive function and required synchronization accuracy.
- Pitch profile, pulley tooth form, pulley diameter and center distance.
- Transmitted load, motor power, speed, acceleration and start-stop frequency.
- Required belt width, tooth count, finished length and installation method.
- Ambient conditions involving dust, oil, chemicals, temperature changes or continuous duty.
- Joining method, packaging, replacement-belt dimensions and required documentation.
Providing these details helps our team reduce back-and-forth and prepare a more accurate timing-belt recommendation and quotation.
Timing-belt profile reference
| Profile | Pitch P (mm) | P1 (mm) | ht (mm) | hs (mm) |
| L | 9.525 | 4.65 | 1.91 | 3.6 |
| H | 12.7 | 6.12 | 2.29 | 4.3 |
| MXL | 2.032 | 1.14 | 0.51 | 1.14 |
| XL | 5.08 | 2.57 | 1.27 | 2.3 |
| XH | 22.225 | 12.57 | 6.35 | 11.2 |
| XXH | 31.75 | 19.05 | 9.53 | 15.7 |
| T5 | 5 | 2.65 | 1.2 | 2.2 |
| T10 | 10 | 5.3 | 2.5 | 4.5 |
| HTD-3M | 3 | 1.82 | 1.17 | 2.4 |
| HTD-5M | 5 | 2.86 | 2.06 | 3.3 |
| HTD-8M | 8 | 5.15 | 3.36 | 6 |
| HTD-14M | 14 | 9 | 6.02 | 10 |
The table reproduces the supplied profile reference. Confirm pitch, tooth form, pulley compatibility and finished belt dimensions before ordering.
Customization discussion
Depending on the application, ask our sales team about pitch profile, belt width, tooth count, open-end or integral construction, double-sided teeth, reinforcement, tooth fabric, joining method and packaging. Availability and suitability should be confirmed against the drive design and required quantity.
Get a technical recommendation and quote
Click Inquiry Now and send your pitch profile, width, tooth count or length, pulley data, load, speed and operating conditions.
Suggested inquiry: “Please quote a rubber synchronous timing belt with profile [S3M / other], width [ ] mm, tooth count or length [ ], pulley details [ ], transmitted load [ ], speed [ ], quantity [ ].”
Frequently asked questions
What is the 5000-S3M-100 timing belt used for?
It is positioned for synchronous power transmission in industrial machinery where a matching S3M pulley and a 100 mm nominal belt width are required.
What information is needed to select a timing belt?
Provide the pitch profile, belt width, tooth count or length, pulley dimensions, load, speed, center distance and operating environment.
Are double-sided and open-end options available?
The supplied product information describes double-sided, integral sleeve and open-end timing-belt constructions. Confirm the required format and dimensions for the drive design.
How do I submit an inquiry?
Use the Inquiry Now link and include the pitch profile, width, tooth count or length, pulley data and quantity.
Rubber Timing Belt Profiles
Company information
