SINOCONVE HTD 8M Rubber Timing Belts 1056-8M, 1136-8M and 1160-8M for Industrial Drives
HTD 8M rubber timing belts in 1056-8M, 1136-8M and 1160-8M sizes are designed for synchronous power transmission in industrial machinery and drive equipment. The curvilinear HTD tooth profile is intended to provide stable pulley engagement and controlled motion transfer when matched with compatible pulleys.
The suitable timing-belt configuration depends on the HTD 8M profile, belt width, tooth count or length, pulley arrangement, center distance, transmitted load, speed, tension and working environment. Share your drive information with our team so we can review the application and confirm the correct specification.
Get a faster, more accurate quote
Click Inquiry Now and include the HTD profile, belt width, tooth count or length, pulley details, speed, load, quantity and operating conditions.
Listed product configuration
| Product | HTD 8M rubber timing belts for industrial drives |
| Pitch profile | HTD 8M |
| Listed sizes | 1056-8M, 1136-8M and 1160-8M |
| Drive type | Industrial synchronous toothed power transmission |
| Available options | Multiple belt widths, lengths and compatible pulley arrangements to be confirmed for the application |
Material and application note
HTD 8M tooth compatibility, belt width, tooth count, pulley dimensions, tension, load, speed and operating environment should be confirmed before ordering. Dimensional stability and wear behavior depend on the selected belt construction and actual working conditions.
HTD 8M timing-belt construction
Stable curvilinear tooth engagement
The HTD 8M tooth profile is intended to engage with a compatible pulley and support stable synchronous motion transfer.
Application-focused selection
Listed belt size, width, pulley arrangement, load and speed should be reviewed together before the belt is selected.
Reinforced rubber construction
The supplied timing-belt information describes a synthetic rubber belt body, fiberglass cord reinforcement and wear-resistant nylon elastic fabric protecting the teeth. Confirm the selected construction for the application.
Listed HTD 8M belt sizes
1056-8M, 1136-8M and 1160-8M
The listed sizes are 1056-8M, 1136-8M and 1160-8M. Confirm the correct length, belt width and tooth count against the existing pulley and center distance.
Why buyers choose HTD 8M timing belts
Supports synchronous industrial drives
The HTD 8M toothed belt and compatible pulley are intended to transfer motion synchronously for industrial machinery and drive equipment.
Offers multiple listed lengths
The 1056-8M, 1136-8M and 1160-8M sizes can be reviewed according to the existing drive layout, center distance and required transmission length.
Supports application-based sizing
Belt width, tooth count, reinforcement, tooth fabric, tension and installation method can be discussed together with the equipment requirements.
Application details we check
- Equipment type, drive function and required synchronization accuracy.
- HTD 8M pulley tooth form, pulley diameter, center distance and alignment.
- Transmitted load, motor power, speed, acceleration and start-stop frequency.
- Required belt width, listed length, tooth count and installation method.
- Ambient conditions involving dust, oil, chemicals, temperature changes or continuous duty.
- Joining method, packaging, replacement-belt dimensions and required documentation.
Providing these details helps our team reduce back-and-forth and prepare a more accurate HTD 8M timing-belt recommendation and quotation.
Customization discussion
Depending on the application, ask our sales team about HTD 8M belt width, 1056-8M, 1136-8M or 1160-8M length, tooth count, reinforcement, tooth fabric, joining method and packaging. Compatibility should be confirmed against the drive design and required quantity.
Get a technical recommendation and quote
Click Inquiry Now and send your HTD profile, selected length, width, tooth count, pulley data, load, speed and operating conditions.
Suggested inquiry: “Please quote an HTD 8M rubber timing belt, length [1056-8M / 1136-8M / 1160-8M], width [ ] mm, pulley details [ ], transmitted load [ ], speed [ ], quantity [ ].”
Frequently asked questions
What are the 1056-8M, 1136-8M and 1160-8M belts used for?
They are positioned for industrial synchronous drive systems using a compatible HTD 8M pulley and the corresponding belt length.
How do I choose between the three listed sizes?
Compare the existing belt length, tooth count, pulley arrangement and center distance. Confirm the selected size with the drive dimensions before ordering.
Can belt widths and constructions be discussed?
Yes. Belt width, reinforcement, tooth fabric, tension and installation requirements can be discussed together with the HTD 8M drive design.
How do I submit an inquiry?
Use the Inquiry Now link and include the selected size, width, tooth count or length, pulley data and quantity.
HTD 8M Rubber Timing Belt Profiles
Company information
