• Sinoconv

    Sinoconv

  • GG

    GG

Sinoconve conveyor belts provide surpassing value for money to help our clients grow their business worldwide.

PRODUCTS

ABOUT

SINOCONVE BELT is focusing on material handling, power transmission and industry application.We are aimed at helping our customers increase production efficiency,offering quality conveyor belts and v belts with high strength,low abrasion,resistant to impact and cut.

Excellent quality and professional service is always our principle since the company was established.With extensive producing technology and rich working experience ,SINOCONVE are dedicated to provide surpassing value for money to help our clients cut cost , grow more business and expand more markets...

+

%

jQuery动态文字效果窗口显示才加载

向下滚动页面查看效果

  • More than 10 year's production experience and
    the power of advanced technology

  • Sinoconve continually strives for efficiency,safety and future.
    The company will keep moving and never stop!

  • 99% of the products are sold abroad.To meet
    various needs from our customers all over the world

2hours ago

Problem Analysis of ribbed belt

Malfunctions during mechanical use are very tricky.When troubleshooting belt faults, in addition to replacing new products, finding the cause of the fault and mastering the correct use method can give full play to the performance of the belt and prolong its service life.



The following table describes the representative phenomena of belts. Please refer to the countermeasures in the table below when a malfunction occurs.

 





Problem


Cause


Solution




Slippage


Belt tension slack


Give moderate tension




overload


Widen the belt or increase the number of belts




Small contact angle


Widen belt or idler with correct diameter of device




Stained with oil or water


Completely remove oil or water. Install the belt cover to prevent the adhesion of oil and water




Premature fracture


Load changes / suddenly overloaded . The transmission conditions used exceed the transmission capacity of the belt. The belt is not hung up according to the specified number; the specified belt shape is not used.
           


The design can be changed, but the hanging belt must be the specified belt shape and number (please use a higher-level belt according to the purpose)




Increase heat or increase bending fatigue (the diameter of the pulley is too small, the bending angle is too small, and the speed is too fast)


Take measures to reduce heat;

CHANGE THE DESIGN — change the pulley diameter, speed, and bending angle     




Tension becomes loose and slips off


Give moderate tension




Cracked


Use at high temperature


Take exothermic measures




Tension becomes loose and slips off


Give moderate tension




Continuous emergency stop or emergency start


Change design




Stained with oil, etc.


Avoid oil adhesion and oil leakage




The pulley diameter is too small, and the back tension causes the reverse bending to be too strong


Change design




Direct sunlight


Attach the machine belt cover




Surface cracking


Tension pulley diameter is too small


Use a larger diameter tension pulley




The bending angle is too small


Relax the bending width




Tension becomes loose and slips off


Give moderate tension




Wear


The pulley groove is rusty or the surface of the pulley groove is rough


Evenly process the groove surface of the pulley




Tension pulley diameter is too small


Use a larger diameter tension pulley




The angle of the pulley device is incorrect; the shape of the pulley is abnormal, and the angle of the pulley groove is not accurate


Adjust the dislocation to below 1/3° , replace the pulley




Excessive vibration


The device of the machine body is unstable and resonates


Fix the device part




The belt tension is weak


Change the distance between axes




Belt length is not uniform


Use a consistent belt combination




Peel off


The transmission conditions used exceed the capacity of the belt


Hang the belt with the correct size, shape and number




Used in a deformed state, the method of use causes increased bending fatigue


Change design




Use noise


Emergency stop or emergency start


Change the design to make the belt run smoothly




Belt tension is too loose


Give moderate tension




overload


Widen the belt or increase the number of ribbed used




Machine belt selection error


Choose the belt shape and specifications that meet the operating conditions




ribbed belt flip


Not suitable for pulley groove angle and device angle


Dislocation aligned to the 1/3 ° or less




Adhesion of the machine belt due to damage to the pulley groove or rough processing surface


Replace the pulley




The belt length is not uniform when using multiple belts


Use a consistent belt combination




Problem Analysis of ribbed belt

10-13

Advantage of conveyor belt in food industry

Conveyor belts have long been integral in manufacturing, packaging, and distribution facilities. 



The food industry has long relied on industrial belt conveyors, mini conveyors, and rollers. These systems minimize human contact, reduce material handling, and make the overall food processing routine safer and more efficient.Conveyor systems come with some distinct advantages in food industry.

1. They Minimize Manual Labor.

2. Conveyor Belts Reduce Accidents and makes operation safer.

3.Conveyors Increase Food Safety and Quality.

Many newer conveyor systems keep products and foodstuffs free of contaminants by design.

Mini conveyors and conveyor belts are integral to the food industry. Items can move from one end of a processing plant to the other quickly, streamlining production.
Advantage of conveyor belt in food industry
上一页
1
2
...
11

TRACKING INFORMATION,FOCUSING ON NEWS

NEWS

SINOCONVE BELT CO.,LTD

Office add:Room 1206, Jinsheng Center, South CBD,Yinzhou,Ningbo,China

Factory add: Guangming Road,Sanmen Country,Taizhou,Zhejiang,China

Tel:0086-574-83057581
Fax:0086-574-83057581
Wechat / Whatsapp: 0086-186 6858 2073

CONTACT US

IF YOU HAVE ANY QUESTIONS OR SUGGESTIONS, PLEASE CONTACT US IMMEDIATELY